BLOG

Contact us

TEL:0086-0755-29684956
E-mail:sales@ykleddisplay.com
E-mail:info@ykleddisplay.com
Address:Building 1, No.46 Donghuan Road, Huangpu Community, Shajing Street, Baoan District, Shenzhen, China.

Comparison Between LED Technologies: DIP vs SMD

Choosing an LED technology is like choosing the right winter coat to wear: there are different models that provide more or less features depending on what you might need. Once you decide the features you want your LED, you can easily choose the package type accordingly. The “package type” refers to the way an LED’s semiconductor die–similar to the filament in an incandescent–is ­packaged inside LED devices for different applications. The LED package can be very basic, like with the DIP LEDs, or it can be very versatile to handle lots of different needs, such as with the SMD package. Modern LED technology as we know it was developed in 1962 by Nick Holonyak with his invention of the DIP LED, and the LED industry has been innovating it ever since. The following article is meant to be a brief overview of the major types of LED package technology that are commercially available today.


Dual In-Line Package LED technology has been around for more than 50 years, and is likely what you think of when you picture an LED. Though it is old, DIP LEDs are far outdated as they are still used extensively today for large signs and displays.  The widespread use of DIP LEDs came about due to their long life-span and intense brightness. DIP LEDs are highly recognizable by their “pill” or “bullet” shaped design (≤5mm wide), and the long contacts that extend the bottom of the LED which can be easily soldered or ed into a bread board. The LED’s plastic and epoxy casing actually serves as a lens that can focus the light coming the diode. The shape of the outer casing also includes a flat edge on one side that always indicates the cathode side of DIP LEDs.

These lights, when used for residential or home use, are typically found in electronics as indicator lights because of their low cost, high brightness, and ease of install. DIP Diodes can be bought in bulk by electronics manufacturers to fulfill many purposes; and because of their plug-and-play nature, can be easily soldered to any kind of circuit board. This gives electronic devices the ability to send information to the user without the need for an actual display on the device.


These LEDs will typically produce between 3 and 4 lumens per LED. They typically run at between 5v to 24v, with 12v being the most common voltage. They individually pull between 0.05 and 0.08 watts. This generates between 35 and 80 lumens per watt, depending on the actual LED.


The SMD chips, or “Surface Mounted Device” chips, have become very popular due to their versatility. SMD LEDs have been used to create everything light bulbs to strip lights, and even missed call indicators on cell phones. These chips are much smaller in comparison to the DIP technology, which tends to give them the added versatility over DIP diodes. SMD technology also supports chips with more complicated designs, such as SMD 5050 chips (depicted to the left), that have RGB capabilities on a single chip.  This is very powerful for color combinations, as opposed to the DIP technology, which can only display one color per device. The technology does not take the bullet shaped design DIP LEDs, and is closer to that of a flat, square computer chip. It is also worth noting that SMD chips can have more than just two contacts (one anode and one cathode). SMD chips can have 2, 4 or 6 contacts, depending on the number of diodes on the chip. With the SMD design, there is an individual circuit for each diode.  For example, SMD 5050 chips have 3 diodes on the chip, which translates to 3 circuits and a total of 6 contacts.


SMD chips have been a very important development for the LED industry because of the ability to put 3 diodes on the same chip. When a chip includes a red, green, and blue diode, you have a chip that can create any color you want by adjusting the level of output each individual diode on the chip. Because they are very bright and can change colors, these chips are used extensively for LED strip lights and light bulbs. SMD LED chips come in a wide variety of sizes, the most common of which are SMD 3528 and SMD 5050S.  SMD 3528 chips are only 3.5mm wide, and SMD 5050 chips are 5 mm wide.  SMD LEDs can also be made much smaller than the 3528 and 5050 chips. Some of these chips are made very small, to go in high end electronics such as cell phones and laptop computers as indicator lights. Any cell phone you see that has a little light that stays on after the screen turns off is powered by a small SMD LED.

SMD chips that we see in light bulbs and strip lights will typically produce between 4 to 5 lumens per diode on a chip (such as a 3528, single diode chip). These chips will typically run at either 12v or 24v, with 12v being the most common. Individually these chips can pull between 0.05w to 0.08w (single diode, 3528) up to between 0.15w to .24w (three diode, 5050). This means these chips can produce between 50 and 100 lumens per watt depending on the particular chip.